Louvre window frames install

★ Plumb and firmly secure the operative side to jamb or mullion.
★ Fit glass from the top blade down and seal blades firmly by closing clip ends.
★ Adjust base of non-operative side to ensure that the louvres (closed) are fited tightly and uniformly. 
★ Check carefully the complete installation. Test the efficient movement of all 
louvre blades by operating the handle repeatedly, until satisfied.

Maintaining aluminium finishes

Regular maintenance of the surface finish will be necessary to reduce the rate of weathering. The frequency of cleaning will depend on the environmental conditions, but as a guide should be done at 3 monthly intervals.
★ Remove loose deposits by gently brushing or hosing.
★ Clean using a sponge or soft brush and warm water with a mild detergent. Avoid cleaning agents with a caustic base, abrasive materials or harsh chemicals.
★ Rinse with clean water.

Glass cleaning

Glass blades should be cleaned with mild, non-abrasive detergents at maximum intervals of 3 months.

★ Fingerprints can be removed from silkscreen glass blades using a cleaner with a 10% isopropanol detergent (eg Windex Original) and lint-free paper towel.

★ When cleaning, the surface of the paper towel used should be changed frequently to avoid spreading fingerprints.

★ Clean sheets of paper towel should be used to dab the silkscreen glass dry. Abrasive or harsh detergents and cleaning tools should not be used to avoid scratching the glass.